What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 05:12
Barnstars:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–10[John johnson John Johnson ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Nationals’ cornerstones come up big in series-opening win against Padres - The Washington Post
[old diagram got deleted by accident]
He then asserts :
2024–10–14 [Omar Gharbi Omar Gharbi ]
Aaron Rodgers Is Married Now - The Cut
Because the load is inductive, the current lags the voltage.(by a bit).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
An AC voltage/ current source, and an ac inductive load.
The other is “what does a “fuse” do?”
A fuse is a non-resetable over current circuit protector.
This is 'the assistant's answer'
What is lightning?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The bolt then partially travels down the line to your home.
Google Search Tests Audio Overview - Search Engine Roundtable
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The third is lightning and “how it gets conducted into a home.”
Is the Kia Tasman the ugliest ute of all time?
2024–10–16 [ OO OLAOYE OYEBODE ]
eight
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Which type of earbuds, wired or wireless, is better for sleep and why?
A circuit breaker is similar, but is resettable.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
nine
(Dc diagram shown, AC is similar).
One
Edit 2024–10.
Analyst sets date when Nvidia stock will hit $200 - Finbold
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At one ohm, the resistor has a maximum of 1 watt power.
Observations from Day 5 of OTAs - Cleveland Browns
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are two important concepts here.
Here is a simplified AC power diagram.
This Image Shows Satellite Streaks Blocking Out the Arctic Sky - PetaPixel
[image of Common-mode choke]
Upvotes:
but this device (an Inductor) … impedes the rapid changes in the current.
At least they know the answer if they wanted it.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then describes Rainy Season and Lightning.
the problem then depends on "how fast does the fuse operate?".
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where the MOV conducts again, and dissipated the energy.
Now when you have a certain ac resistance, then a current flows in a loop.
These devices are installed between the “hot” and “neutral” and protective ground.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But… the neutral is now “floating” because of the 1 ohm resistance.
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
I post the exact comment here.
He then describes the function of a fuse.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, what happens?
It also is a device that limits the change in current flow.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
In schematic diagrams this is the symbol for a fuse:
What does a fuse do?
These are simplified answers to the original question, and does not change anything I wrote above.
One is “what exactly is in a ‘surge protector’ ? ”
But it can get overloaded, and no longer works.
There are three different concepts here that are getting confused.
First Sentence:
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This device then solves the entire problem.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].